Avatar Machine
"Where CNC precision happens"
Equipment
Avatar Machine has procured state-of-the-art CNC machines with high-quality, high precision and high-value technology which offers a wide range of different shapes and sizes of complete products.
Avatar Machine has procured state-of-the-art CNC machines with high-quality, high precision and high-value technology which offers a wide range of different shapes and sizes of complete products.
| Picture | Qty | Description |
|---|---|---|
 |
1 | 2011 Litz CV-1400 vertical machining center has 55.1" x 35.4" x 31.5" (1400 x 900 x 800 mm) XYZ travels and is built base on Meehanite cast iron. The Litz CV-1400 has a wide base, box-shapped column, enhanced saddle and full supported workpiece structure all continue to the ability for heavy duty machining. The Litz CV-1400 has a 50-taper with a maximum spindle speed up to 10,000 RPM and a rapid traverse rate X, Y, Z: 20m/min. |
 |
1 | 2008 Litz LH-500B horizontal machining center has 28" x 26" x 26" (700 x 650 x 650 mm) XYZ travels and is built base on Meehanite cast iron. The Litz LH-500B has a wide base and robust structure that yields reliability, high precision and performance in a large-framed machine. The Litz LH-500B has a 50-taper with a maximum spindle speed up to 10,000 RPM and a rapid traverse rate X, Y, Z: 36m/min. |
 |
1 | 2008 Haas VF-10/50 vertical machining center has 120" x 32" x 30" (3048 x 813 x 762 mm) XYZ travels and is built utilizing all American-made cast-iron components. The Haas VF-10/50 is a rugged, gear-driven VMC that yields reliability and accuracy in a large-framed machine. The VF-10/50 has a 50-taper cartridge spindle that's powered by a 30-hp vector Dual-Drive (Y-Delta) motor running through the 2-speed geared head. The VF-10/50 will produce 450 ft-lb of torque at a low 500 rpm, but will also run up to 7,500 rpm in less than 5 seconds for finishing aluminum. |
 |
1 | 2008 Haas VF-4 vertical machining center has 50" x 20" x 25" (1270 x 508 x 635 mm) XYZ travels and is built utilizing all American-made cast-iron components. The VF-4 has a 40-taper cartridge spindle driven by a 20 hp vector Dual-Drive (Y-Delta) motor. The VF-4 produces either 75 ft-lb of torque at a low 1400 rpm, or 250 ft-lb at 450 rpm with 2-speed gearbox -- and will also run up to 7500 rpm in 1.2 seconds for finishing aluminum. |
 |
1 | 2008 Haas VF-3 vertical machining center has 40" x 20" x 25" (1016 x 508 x 635 mm) XYZ travels and is built utilizing all American-made cast-iron components. The VF-3 has a 40-taper cartridge spindle driven by a 20 hp vector Dual-Drive (Y-Delta) motor. The VF-3 produces either 75 ft-lb of torque at a low 1400 rpm, or 250 ft-lb at 450 rpm. |
 |
1 | 2008 Haas HRT 310 Rotary Table horizontal/vertical T-slot rotary table, for holding medium to large parts or fixtures. The Haas HRT 310 has a platter size of 310 mm (12.204") and a weight capacity of 217.5 lbs unsupported - 435 lbs when supported by a tailstock |
 |
1 | 2008 Haas SL30 with a max turning capacity of 17" x 30" and an 10" chuck, has a bar capacity of up to 3.0". SL-30 high-performance turning centers also feature massive headstock castings with symmetric ribs for rigidity and thermal stability; on-the-fly wye-delta switching for peak performance throughout the rpm range. |
 |
1 | 2008 Haas SL20 with a max turning capacity of 10.3" x 20" and an 8.3" chuck, has a bar capacity of up to 2.0". SL-20 high-performance turning centers also feature massive headstock castings with symmetric ribs for rigidity and thermal stability; on-the-fly wye-delta switching for peak performance throughout the rpm range. |
 |
1 | Milling Machine KBC TUM-3VS 3 HP VS mill head has compound swivel mount for maximum versatility in your set-ups and standard R8 spindle taper. Hardened and ground square ways on knee column with wide saddle to support 10” x 50” ground table. |
 |
1 | 2008 KBC GRIP-1440G all gear head, hardened and ground ways, 16 spindle speeds, 45-1800 RPM. 14” swing x 40” between centers, D1-4 spindle mount, 1-1/2” bore. 3 HP and 1,980 lbs. |
 |
1 | 2008 KBC BAH-916 Horizontal Bandsaw 9” round, 3” x 16” or 9” x 13” rectangular capacity @ 90 deg. Hydraulic feed control, built in coolant system, 4 blade speeds, 1-1/2 HP. |
 |
1 | 2008 KBC BAV-450 Vertical Bandsaw built on a solid cast frame. Large cast iron work tables tilt R & L and F & B. Infinitely variable speed. This allows you to select the most efficient speed (FPM) for each piece quickly and easily. Come complete with a built-in blade welder. |